CNC Pipe Punching Line
Pipe bending/ Pipe end forming
Metal Circular Saw
Band Saw
Flange machine
Roll Forming Machine
EZM Slurry
Heat resistant materials
Press Brake
Machine center
Shearing Machine
Power Press
Water Jet
Ironworker
Rivet Machine
Polyurethane Foam Machine
Drilling Machine
Milling Machine
Slotting Machine
Grinding Machine
Rolling technical services
Turret Punch Press
![]() |
For more styles & prices, please feel free to contact us.
|
Main Features:
1.Totally EU streamlined design,Monoblock by welding robots & aparatus and stress relief process by Annealing treatment.
2.Adopt integrated hydraulic system, more reliable and easy for maintenance.and the hydraulic system from Bosch-Rexroth,Germany,
3.The EMM Hydraulic Guillotine is a Variable Rake Action machine which is produced in a variety of cutting lengths & capacity options.
4.The distance of the backgauge is adjusted by the motor and is well adjustment is displayed by Germany P40 with Delta inverter.
5.Equipped with lighting-alignment, so as to align when shearing. The stroke of knife beam can be adjusted in stepless mode.
6.Safe fence and the electric interlocker have been designed for the machine to ensure the operation safety to CE regulation.
Standard Equipment:
●Germany ELGO P40 NC control System
●Powered Back gauge X-axis
●Cutting Angle & Gap by P40 control
●DELTA Inverter controlled back gauge
●HIWIN Ball screws & Polished rod with 0,05 mm accuracy.
●Germany Bosch-Rexroth Hydraulic
●Germany EMB Tubing connector
●Germany Siemens Main Motor
●Telemecanique/Schneider Electrics
●Hydraulic & Electrical overload protection
●Cutting Line Illumination and wire for shadow line cutting
●Top blade with two cutting edges and bottom blade with four cutting edges. (6CrW2Si)
3. Safety Equipment: 5. Specification
6. Main Configuration:
Serial No. Part Description Brief instruction/ Orignal Other 1- NC Control system ■P40 NC System □E21s NC System 2- Electrical components Travel switch & Limit switch 3- Main Motor Siemens from Germany Brand 4- Back Gauge & RAM Drive Inverter from Taiwan delta Accurate positioning control 5- Foot switch KACON from South Korea 6- Hydraulic System Bosch-Rexroth form Germany Sealing Element PARKER from U.S.A Brand 7- Tubing connector EMB form Germany Brand 8- Ball screw/ Polished rod HIWIN from TaiWan Brand 2. Equipment 1- Pneumatic sheet support system □Yes ■No 2- Rear sheet sliding plates ■Yes □No Fixed type(metal) 3- Angle Gauge □Yes ■No 4- Squaring Arm(800mm) ■Yes □No 5- Inverter accurate control ■Yes □No 6- Light curtains for finger Protection ■Yes □No Reset button 7- Back safety Sensors ■Yes □No 8- Back metal fence Safety ■Yes □No 9- Safety standards ■CE □CSA □NR-12 □OSHA For the following, our customer choose the 10*2500 shearing machine, see the picture for reference, but our machine can cut the thickness up to 12mm This is the difference between European shearing and our shearing machine for thickness 1.5mm, width 16mm, length: 2600mm The differences between the P40 system and E21S SYSTEM E21S for Guillotine Shearing Machine can not control directly, it can not show the exact digital for shear angle and blade gap, it belongs to a low-level system, E21S is only good use for Guillotine Shearing Machine, control one backstop but hard for guillotine shearing machine . For P40 Germany system, only import the plate thickness and length, its function is same to DAC360, it is widely used in the market.
|
●
1
|
●
the operation safety to CE regulation.