EZM, group C is a single-stage slurry single-use cantilever horizontal centrifugal pump.absorb the structural design of domestic and foreign products and the advantages of the pump is easy to install and convenient maintenance demolition.PART : ZM, group C Slurry Pump for double pump shell structure that, after the pump casing, the former boards after boards, sheathing.Sleeve component.Some used JM3 flow, which, by the gray cast iron or ductile iron shell after pump manufacturers.Turpan position may need to pump exports by 45 ° intervals, rotating eight different angles installation.users can install the angle of the impeller blade back after a Flat to reduce leakageimprove life and efficiency of the pump.There are two types : Gland seals, vice impeller shaft seal and packing seals.Vice impeller is not diluted slurry seals, sealed long life and good sealing effect advantages.Packing Seal simple, and easy maintenance.
Slurry Pump EZM, group C : Drive-use direct-drive, bearing components for body structure and high strength.shaft diameter, rigid, cantilever short, in a poor condition and not bending vibration.Bearing heavy use separate Tapered Roller Bearings and able to withstand the pump axial and radial load.Bearing grease lubrication.Bearing gland body ends bearings inside ring, can effectively prevent the pulp and grease into the leaks,Bearing ensure safe operation.According to user requirements, using off-site transmission bearings, and lubrication oil lubrication, lower Hotbox.